Outdoor Roller Shades

Outdoor Roller Shade
with Manual Crank

Adjustable woven shade for patios, porches, pergolas and gazebos. Designed to soften direct sunlight, add daytime privacy and preserve an open-air feel.

Preview now · purchasing opens later

All variants have tracked inventory set to zero and cannot be purchased.

Planned color Beige
These six colors are the planned collection. Availability may open by color in stages.
Planned size width × height
Final production measurements will be confirmed before ordering opens.
Your interestBeige · 4 × 6 ft
Manual crankWoven fabricDual bottom ties
Your outdoor room, reconsidered

Keep the outdoors.
Soften the sun.

Lower the shade when you want less direct sunlight and a little more daytime privacy. Roll it up when you want the view back.

Beige pairs naturally with limestone, olive green and woven textures.

Beige outdoor roller shade installed on a covered patio
01

Light, gently filtered

Woven fabric softens direct sunlight without closing the outdoor space in.

02

A little more privacy

Helps soften daytime sightlines. Visibility varies with the lighting on each side, especially after dark.

03

Control within reach

Turn the manual crank to adjust the shade. Release the bottom ties before rolling it up.

At a glance

Made for your
everyday outdoors.

  1. 01
    Shade for outdoor living

    Planned for covered patios, porches, pergolas, gazebos and balconies.

  2. 02
    Cordless manual crank

    Raise or lower the shade without a hanging operating cord.

  3. 03
    Sectional tube connection

    Internal connectors join the tube sections with four fixing screws per joint.

  4. 04
    Bottom rail and two tie-down points

    Helps keep the lowered shade positioned during ordinary use.

  5. 05
    Six considered colorways

    Mocha, Gray, Beige, White, Black and Green/Beige cover warm, cool and architectural outdoor palettes.

A good fit starts here

Know the size.
Plan the coverage.

Overall widthFinished drop

4 × 6 ft planned size

Nominal width: 48 in · planned drop: 72 in. Final overall assembly width and fabric width will be published after production verification.

Check the complete assembly width for mounting fit and the fabric width for shade coverage. Measure an opening at the top, middle and bottom; plan suitable overlap for outside mounting.

01 / Measure the opening

For an inside mount, use the narrowest of the top, middle and bottom width readings.

02 / Plan the coverage

For an outside mount, include the overlap you want beyond the opening.

03 / Allow room to operate

Check bracket clearance, fixing surface, crank access and bottom tie positions.

Nominal sizeNominal widthPlanned dropLaunch status
4 × 6 ft48 in72 inPlanned
5 × 6 ft60 in72 inPlanned
6 × 8 ft72 in96 inPlanned
7 × 8 ft84 in96 inPlanned
8 × 8 ft96 in96 inPlanned
9 × 8 ft108 in96 inPlanned
10 × 8 ft120 in96 inPlanned
Sectional construction

Connect. Mount.
Enjoy the shade.

The final installation video is being produced for the sectional model. It will show tube assembly separately from wall or ceiling mounting.

01Join the tube sections

Insert the internal connector and align the pre-positioned fixing holes.

02Secure each connection

Fasten four screws per internal tube joint following the supplied sequence.

03Install the brackets

Use suitable fasteners for the verified wood, masonry or metal mounting surface.

04Fit, test and secure

Fit the roller, test the crank and position the two lower tie-down points.

Care & answers

A little care.
More time outside.

Does the shade provide privacy at night?

Woven shade fabric is not a blackout screen. Visibility depends on the lighting on each side and can increase when the space behind the shade is brighter.

Does the listed width equal the fabric width?

No. The overall assembly is wider than the fabric. Final overall and fabric measurements will be published for every launch size.

What should I do before wind or storms?

Release the bottom ties and retract the shade. Follow the supplied care and weather guidance for the finished product.

How should the fabric be cleaned?

Follow the final care label. Avoid machine washing, tumble drying, bleach and pressure washing unless the verified instructions specifically permit them.

Will custom sizes be available?

Custom sizing is planned as a separate service. Standard launch sizes will remain clearly separated from made-to-measure enquiries.

Early access

Planning a patio project?

Select your preferred color and size above, then join the launch list. We will send availability news and the subscriber discount code when ordering opens.

Choose your shade & join the list
Beige · Product view
Enlarged outdoor roller shade image